3050 Series
Standard Accessories:
Hardened Guideway, Switch Shaft, V Belts, Catch Plate Inch/mm Gears, Set Of 2 Nos. Dead Centres with Centre Bush, Oil Can, Set of Allen Keys, Spanners & Instruction Manual.
Optional Accessories:
Face Plate, Steady Rest, Follow Rest, Electric Coolant Pump with Tank & Fittings, Taper Turning Attachment, Rear Tool Post with Long Cross Side, Key way Cutting Attachment, Machine Lamp with Control Transforrner, Chuck Flange. 4 Jaw Dog Chuck, 3 Jaw True Chuck, Quick Change Tool Post with Tool Holders. Tool Post Grinder (External/Internal) Revolving Centre & Control Panel with Foot Brake.
| TYPE OF BED | 2 Flat & 2V | |||||
| HEIGHT OF CENTRE | mm | 330 | ||||
| WIDTH OF BED | mm | 375 | ||||
| SWING OVER BED | mm | 630 | ||||
| SWING OVER CROSS SLIDE | mm | 500 | ||||
| SWING IN GAP | mm | 440 | ||||
| LENGTH OF GAP IN FRONT OF FACE PLATE | mm | 920 | ||||
| No. OF SPINDLE SPEED/RANGE | 8/20-835 | |||||
| SPINDLE SPEED RANGE | RPM | 20-835 | ||||
| SPINDLE BORE | mm | 80 | ||||
| SPINDLE NOSE | A2 Size 8 | |||||
| TAPER BORE IN CENTRE BUSH | MT | 4 | ||||
| TAIL STOCK QUILL DIAMETER | mm | 75 | ||||
| TAPER IN TAIL STOCK QUILL | MT | 5 | ||||
| CROSS SLIDE TRAVEL | mm | 330 | ||||
| COMPOUND SLIDE TRAVEL | mm | 180 | ||||
| TAIL STOCK QUILL TRAVEL | mm | 200 | ||||
| TOOL POST SQUARE | mm | 150x150 | ||||
| TOOL SHANK SIZE | mm | 32x32 | ||||